Go to content Go to menu
 


How to Install a Timber Deck With Benches

2012-05-25

A timber deck can be a great addition to your home cabin. It provides a place for you and your family to sit in the mornings and drink coffee or a place for friends to gather and eat in the evenings. Many people enjoy having decks because they provide a way to get outside without having to leave the comfort of the building - you will be outside of the walls, of course, but you can still have couches, chairs, end tables, and the like. With just a few easy steps, you can install the deck yourself.
Iron Wood Decking
The first thing that you will need to do is to get all of the Timber Decking material. You want to make sure that you have enough so that you will not have to go off in search of more before the deck is finished. Besides the boards themselves, you will need to have galvanized screws, a level, shovels, concrete mix, and some type of wood sealant. You will also need to have a device to apply this wood sealant. You can either use a sprayer or a paintbrush, whichever you prefer.
To get started, you will need to find places for your main support posts. You want these to be evenly spaced so that they give the deck a lot of strength. When you have identified the places, dig holes and set the pre-cut posts into them. Check to make sure that the posts are level; if they are not, the whole deck will not be square and it will not go together easily. At this time, you can use the cement to give the posts a bit more strength. Some people do not choose to do this since it costs extra money, but it is a good way to make sure that the posts do not shift or sink.
Chengal Decking
With that done, use the Timber Decking to create the frame for the deck. You need to run boards along the outside of the posts, but that is not all. You also need to create a grid to go between all of the posts. In many ways, this is similar to how a wall is constructed with many studs. You need to have the boards fairly close together so that the deck is strong. When the grid has been constructed, you can put the rest of the boards down over it and secure them with the galvanized screws. You do not have to use galvanized screws, but they are a good option because they are more resistant to the weather.
source
With the main boards down to form the base of the deck, you just have to create the benches. You have a few options. You can build stand-alone benches out of the same Timber Decking material so that they match the deck; this allows you to move them around when you want. Many times, however, people will construct benches alongside the railing. You can make a basic box frame and then cover it, allowing the railing to act as the back of the bench. If you want to use the benches for storage, build solid lids and connect them with hinges. All that you have to do to finish the project is to put down the wood sealant.